Rhino Rack Roof Rack Review - 2012 Scion xB- Video
Today on our 2012 Scion xB, we're going to take a look at the Rhino-Rack Vortex Aero Crossbar roof rack. The crossbar number will be RRVA137B-2. The Series Legs will be RRRLKVA, and the clamps and pad will be DK152. Now, I already have the first one already on our vehicle. Going to show you how we install the second one. What we have up here, we have our crossbar, we have our Series Leg, then we have our clamp and pad here. We have our covers to cover up our Series Legs. more
12/8/2015 8:46:06 AM
Thule Roof Rack Review - 2014 Scion xB- Video
Today on 2014 Scion xB, we're doing a test for the Thule AeroBlade Rapid Traverse Roof Rack System using part numbers THARB60 for the aluminum load bars, front and rear, part number TH480R for the foot pack, and then part number THKIT1482 for the fit kit. I've already got the front cross bar, excuse me, load bar installed on the Scion. Let's go ahead and put this one together and then I'll show you how I got the measurements. First thing we'll do, so let's go ahead and turn it over. Let's remove our end cap. Now, we want to refer to our fit guide to find the right scale number that we need to beget for our scale here. Let me go ahead and adjust that. more
5/27/2015 3:41:06 PM
Rhino Rack Roof Rack Installation - 2012 Scion xB- Video
Today with us we have a 2012 Scion xB and well be testing a Rhino rack roof-rack system. Well be using the bars part number da1375 as well as fit kit part number dk152. We already have our roof rack assembled according to the instructions and now were ready to fit it up on our vehicle. To position the front bar were going to measure from the center of the door seam to the center of the front tower. We need to set our bar on this front measurement at nine and one sixteenth of an inch. Once we have our front bar in position well go ahead and fit the clamps to the frame of our door and use the included wrench to tighten them down. more
7/19/2012 12:49:10 PM
Filter Videos
Filter Videos
